收cang本页 nin好,欢迎来到上海环亚app,环亚appjiang竭诚为nin服wu!    工作时间:上午 9:00 - xia午 18:00 温xin提示:
EHS 网站
热men搜索:
防火gui、安全gui、化学品gui、工业安全锁具、盛漏托盘、吸附棉套zhuangdeng工业安全与环保产品;实验台、实验室家具、通风gui、实验guideng实验室设计gui划、sheng产、安zhuang及配jian;li心机、防爆工具、hong箱、超声波清洗机、水zhi监测仪器及实验室hao材deng共3大类产品。
产品分类
品pai专区 >>geng多
Ultra-EverDry?ying用指南|上海环亚app实验室设备有限公司
Ultra-EverDry?ying用指南
 
yi.Ultra-Ever Dry? SE 7.6.110 is a solvent based two part (top and bottom) coating system. It is suitable for indoor or outdoor use. The system offers superhydrophobic and superoleophobic performanceand has been shown to maintain a high level of performance
under a variety of conditions and for extended time. The system is useful for non-wetting, anti-icing, self-cleaning, anti-bacterial, and for corrosion protection.
Ultra-Ever Dry? SE 7.6.110是yi种rong剂xing涂层(表面和打di两gebu分)。蕇hi糜谑夷诨蚴彝鈟ing用。已经zheng明其可以在多种tiaojianxia和较长时间内维chi超强的shu水和shu油性能。该涂层对于防潮、防结冰、自洁,**、防腐蚀deng都fei常有用。
 
.Ultra-Ever Dry? SE 7.6.110 yields a matte finish surface that withstands moderate abrasion. The coating is translucent white in appearance depending on thickness used. Ultra-Ever Dry? SE 7.6.110 is applied in two steps using an equal application volume of bottom coat and top coat.
Ultra-Ever Dry? SE 7.6.110 ?SE产shengyige哑光表面可以承受蕇hi鹊膍o擦。涂层材料呈半透明bai色bai色的浓度则qu决于喷涂厚秖uⅫ/span>Ultra-Ever Dry? SE 7.6.110 ?SE喷涂作业分两ge步骤用相tong量的打di层和表面依磜en缤俊Ⅻ/span>
 
.CAUTION: Items coated with Ultra-Ever Dry? will have a translucentwhite appearance which could affect the color of the product being coated. TEST ON AN INCONSPICUOUS AREA PRIOR TO FULLY COATING.
注意Ultra-Ever Dry?涂层呈半透明bai色可能会影响到产品本shen的色cai。所以建议nin在使用前在yi些不xian眼的bu位先做yixia实验,以que定不会对nin的产品造cheng影响hou再使用。
 
si.Personal Protection Equipment:
ge人防护设备:
Always wear the following equipment when applying:
在施工作业过程中请使用以xiage人防护设备:
Respirator - NIOSH approved half-face respirator P100 rating with organic vapor cartridge
呼吸器:NIOSH核准的半面誾hi酱谢羝撕械暮粑鳇/span>P100
Safety glasses/goggles
安全眼睛/护目镜
Nitrile gloves
丁腈手套
 
.Application Equipment Options:
施工设备选项:
Option A: Pneumatic Sprayer
?选项A:qi动喷雾器
Air compressor
空压机
Conventional gravity fed, pneumatic sprayer, requires two separate sprayers
常gui的自动给料qi动喷雾器,需要两把单独的喷雾器
Note: Remove the pre-installed filters in the sprayer head
注意: ba除喷雾器头蓌ianhuang的过滤zui
Air pressure = 20-35 psi (138-241 kPa) nozzle
qi压=20-35psi(138-241kpa)喷zui
Tip size = 0.020-0.050 inches (0.50-1.27 mm)
顶端尺寸=0.020-0.050英寸(0.5-1.27mm
 
Option B: Pump Sprayer
?选项B:qi裧u脚缥砥鳇/span>
Two hand pump sprayers, one for top coat and one for bottom coat.
两ge手动qi压喷雾器,yige用于打di涂层、yige用于表面涂层
Pumps must be compatible with solvent in coating.
qi压喷雾器必xu适合于rong剂类涂料
Xylene for bottom coat and Acetone for top coat.
打di涂层含有二甲苯,表面涂层含有丙酮。
Adjustable tip size to provide fine mist.
可调节的喷zui可以提供*适合的厚度
 
Option C: Trigger Sprayer
?选项C:扳机式喷雾器
Two trigger sprayers, one for top coat and one for bottom coat. Usually available in quart (950 mL) sizes.
两ge扳机式喷雾器,分bie用于打di和表面涂层。通常可提供1夸脱(950 毫升)容积大xiao。
Pumps must be compatible with solvent in coating.
扳机式喷雾器必xu蕇hi糜趓ong剂类涂料。
Adjustable tip size to provide fine mist.
可调节的喷zui可以提供*适合的厚度
 
.Optional Equipments
?附jian设备
Heat gun or blow dryer to speed up drying process.
萹ue鐀iang或者吹风机用于加速干燥过程
Xylene for cleaning     
二甲苯清洗
Spreading Rate (coverage):
涂布率:
150-180 sq ft/gal (3.68-4.42 m2/L)
150-180ping穓ie⒊撄/span>/加lun3.68-4.42ping方米/
 
liu.Application:
ying用
Surface Preparation: Remove all oil, grease, dust, dirt, loose rust, and other foreign materials to ensure adequate adhesion of bottom coat. Sanding of the surface with 150 grit silicon carbide sand paper can enhance surface adhesion.
表面处理:qu除所有的油、油脂、灰尘、wu垢、shu松锈层及其他异物,以que保打di涂层良好的附着力。如guonin使用150#砂纸打磨表面的话可以提高表面附着力。
Step 1: Bottom Coat
步骤1:打di涂层
Shake the can of bottom coat well and pour into dedicated sprayer.Once sprayer is filled to the desired amount, shake well and apply multiple thin and uniform coatings to obtain a wet thickness of 3.0-5.0 mils (76-127 microns). This will form a dry film thickness of 1.0-1.5 mils (25-38 microns). Some agitation during application is recommended. Avoid over wetting or pooling. Allow 15 to 20 minutes of drying time before applying top coat. A heat gun or blow dryer may be used on low setting to speed up drying time.
摇yun打di涂层,倒入专觤en缥砥鳌W⒙缥砥饕詇ou摇yun,多次薄而均yun的喷涂到3.0-5.0 mils (76-127 microns)。dang干燥hou厚度会在1.0-1.5 mils (25-38 microns)。建议在作业过程中不停晃动喷雾器。避免过于潮湿的环境和水池。打di涂层喷涂hou需要deng待15-20分zhong,待其干燥hou再行表面涂层喷涂。萹ue鐀iang或者吹风机可以加速干燥的过程,缩短gu化时间。
Step 2: Top Coat
步骤2:表面涂层
A separate sprayer used only for top coat is required. Shake the can of top coat well and pour into sprayer. Once sprayer is filled to the desired amount, shake well and apply multiple thin coats. Do not overcoat. Use an equal volume of top coat to cover the bottom coat. Some agitation during application is recommended.
表面涂层必xu使用yige单独喷雾器。摇yun表面涂层,倒入喷雾器。注满喷雾器以hou摇yun,多次薄而均yun的喷涂。不要过多的喷涂,使用相tong的量fu盖打di涂层。建议在作业过程中不断的晃动喷雾器。
Avoid over wetting or pooling. The top coat will produce a translucent white appearance.
避免过于潮湿的环境和水池。表面涂层jiang呈现bai色半透明的外观。
Step 3: Drying/Curing of System
步骤3:干燥/gu化方fa
The coating will become superhydrophobic within 30 minutes of the top coat application. For best results, allow 2 hours of drying time. A heat gun or blow dryer may be used on low settingto speed up drying time.
涂层的超shu水性能会在喷涂表面涂层以hou30分zhong内呈现。*佳效guo大概需要2gexiao时的干燥时间。如guo使用萹ue鐀iang或者吹风机jiang加速干燥过程,缩短gu化时间。
Step 4: Cleanup:
步骤4:清理:
Clean tools/equipment immediately after use with xylene. Empty left over top or bottom coat into original containers.作业hou立即使用二甲苯清理工具/设备。剩余的表面或打di涂层倒回原容器内。
 
.Care and Repair:
维护与保养:
Ultra-Ever Dry? is a durable coating that exhibit superhydrophobicityand superoloephobicity. After curing the coatings will repel water mixtures and refined oil. Cleaning of the surface should be performed using low pressure water spray. The surface
should demonstrate self cleaning properties under these conditions. Dust and dirt should rinse off easily. The surface will remain completely dry. The surface will lose it properties if treated with detergents, soap, some solvents or high pressure water.
 Due to the natural oils in the skin, excessive handling with bare hands of treated materials can cause a reduction in performance as can severe abrasion.
Ultra-Ever Dry?必xutong时使用两种涂层方可呈现超shu水与超shu油特性。dang涂层完全gu化hou可以di抗水hun合物和精lian油。请使用低压水喷雾来清洗表面,在低压水流的chong洗xia表面jiang会实现自洁。灰尘以糱a酃竕iangfei常容易被chong洗掉,表面jiang保chi完全干燥。洗涤剂、肥皂、某些特bierong剂或是高压水流jiang会影响涂层表面bu分性能。皮肤中含有天然油脂,gu过多的徒手jiechu喷涂过的表面亦可能会因严重磨sun而致表面性能xiajiang。
 
 
 
Instructional Video available at www.UltraEverDry.com-or-Scan this QR Code with your smart phone.
 
 
ye可咨询:021-69106488

上海环亚appjjiang为你服wu!

产品链jie:http://www.caisonglabs.com/s04/caisonglabs/sjml/20130308/3049448/1.html
 
Copyright? 2003-2020  上海环亚app实验室设备有限公司版quan所有
dian话:021-69106488 021-69106624 传真:021-69106489 di址:上海shi松江区广富林路658弄3haoxie字楼1410室 邮编:201620

沪ICP备13012389hao    

沪公网安备 31011402005026hao